+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: DreamScape (https://forum.afterworks.com/forumdisplay.php?fid=11)
+--- Thread: One sea, different wakes (/showthread.php?tid=273)
One sea, different wakes - Anthony - 01-19-2007
Hi people
I'm designing a Harbor with two breakwaters for the harbor entrance. The main usage of a breakwater is of course to break the incoming wakes.
What I would like to see in my animation is the harbor with of course the sea, but with higher wakes outside the harbor and smaller wakes inside so I can clearly show to our clients that wakes are being broken.
Can I do this with one seasurface? Or do I have to creates two different surfaces with different parameters?
Thank you!!!!
Anthony
- sitnisati - 01-24-2007
Hello Anthony,
Maybe you could add some modifier to the DS Surface ?
If that does not work, then you'll need to create two different Sea Surfaces.
Maybe someone else has a better idea ?
Kresimir
- Steve Green - 01-26-2007
Well, I guess you could have a vol select on the area inside the harbour, and use a relax/xform scale maybe? Possibly also a bit of noise to make it look a bit different to the open sea.
- Steve
- Anthony - 01-30-2007
Two sea surfaces was good, the Xform and relax modifiers was even better :-)
Thank you for your help!!!!
Anthony