01-23-2007, 01:34 AM
I didn´t try it with smoke, only for creating the velocity-field, and the displayed velocity looked strange (with both, positive and negative wind-/gravity- values). I´ll try it again with smoke, looking if it behaves as wanted. If not i post here again with scene.
@milwatt: 2 suggestions:
1) create an additional ffxSimpleSource, make it box, sett to freeflow. Set all channels to "add 0" and the speed- and noise-values to 0, too. (In fact, make sure that this source does not affect you sim in any way.) Then add it to the sim, set the simulation-grid "Sensivity" to 0.
Run again.
2) Try an "Mesher"-Compound with you emitter and use the Mesher with Fume.
@milwatt: 2 suggestions:
1) create an additional ffxSimpleSource, make it box, sett to freeflow. Set all channels to "add 0" and the speed- and noise-values to 0, too. (In fact, make sure that this source does not affect you sim in any way.) Then add it to the sim, set the simulation-grid "Sensivity" to 0.
Run again.
2) Try an "Mesher"-Compound with you emitter and use the Mesher with Fume.