How to get foam on the wakes ?

[bernhard]

thank you for your fast reply.

I've checked everything, and I could find out that it is a material issue.
Or better, the render I use.

I use vray sun & sky system, because all renders I do I have setup with vray. I could find out, that the vray sun & sky settings are burning out the Dreamscape materials.

That means, if I use the Dreamscape SeaSurface Material on the sea, and I will use Vray Sun & Sky with the lowest settings you can use, you still get a very bright result, look here:


So I decided to use the Dreamscape Materia in a Vray Blend material, mixing both of them a little bit to get a nice sea material.

I could reach a nice result and getting a nice sea material with this method, but it seems to be, that now you can't see the foam.

That means, the foam was calculated correct, and it would work, if I would have any other material solution.

Hmm, well, but now I really have a serious problem, because the whole setup was made for vray sun and sky, and now I have no idea, how I can fix that material issue.

thx for every little help,
bernhard